Advantech MIC-3723 Spécifications télécharger pdf (Page 4)

Features

7-4

CompactPCI Systems

 Eight 3U CompactPCI

slots

 Easy installation: rackmount or panelmount

 Hot-swap compliant backplane

 Hot-swap fan tray module

 Optional fault detection and alarm notiﬁcation

 Logic Ground and Chassis Ground can be isolated or common

Introduction

The MIC-3001/8 is a 4U-size enclosure with eight CompactPCI

slots for rack or panel mounting. Its ﬂexible modular design allows users to conﬁgure for a variety of applications.

Reserved space in Device Bay can be used to install peripherals such as an alarm module, a power supply or a CD-ROM drive.

Hot-swap Passive Backplane

The 3U-size 8-slot backplane of the MIC-3001/8 supports 32-bit or 64-bit (optional) operation. The backplane complies with the PICMG 2.1 Hot-Swap Speciﬁcation, and you can

build easy-to-maintain systems with hot-swappable CompactPCI

boards and software.

Hot-swap Fan Tray Module

A 1U-high fan module provides forced cooling air into the system. Two 133-CFM high-speed fans are mounted in a hot-swap tray directly underneath the card slots. The fan's

tachometer output enables the alarm module to monitor the speed of the fans, and a protective circuit has been designed into the fan backplane to reduce spikes and noise during

hot-swapping. This design allows replacement of fans without turning the system off.

MIC-3001/8

MIC-3001R/8

Speciﬁcations

 Construction Aluminum frame and galvanized sheet steel

 Slots 21-slot space (84 TE), 8 CompactPCI

slots, including

one system slot and seven peripheral slots.

 32-bit CompactPCI bus

 Hot Swap Compliance PICMG 2.1 R 1.0 Hot Swap Speciﬁcation

 Dimensions (W x H x D) 440 x 178 x 240 mm (17.3" x 7" x 10")

Mnt. ﬂanges not inc.

 Weight 7 kg (15 lb)

 Operating Temperature 0 ~ 50° C (32 ~ 122° F)

 Relative Humidity 10 ~ 90% @ 40° C, non-condensing

(operating and storage)

ATX Power Supply

 Input 90 ~ 135 or 180 ~ 265 V

@ 47 ~ 63 Hz, switchable

 Max. Output 400W total, 210 W for +3.3 V and 5 V

 MTBF 100 kHrs at 75% load for 25° C, Ambient Temperature

 Safety UL/CUL/CE

Backplane

 Slots 8 CompactPCI

slots (one system slot and 7 peripheral

slots)

 Bus Width 32-bit (64-bit upon request)

 PCB 8-layer PCB, 3.0 mm thick

 Separation Separate power and ground planes

3U 8-slot CompactPCI

Enclosure

3U 8-slot CompactPCI

Enclosure with

Rear I/O Slots

 Power Connector One ATX power connector for connecting standard ATX

power supply

 Alarm Connector 20-pin connector for MIC-3920/MIC-3921 alarm board

signals

 Compliance Complies with PICMG 2.0, Ver. 2.1 CompactPCI

Speciﬁcation and

PICMG 2.1, Ver. 1.0 Hot Swap Speciﬁcation

 I/O Voltage 3.3 V or 5 V, jumper selectable

 Logic Ground and Chassis Ground can be isolated or common

 Dimensions (W x H) 262.8 x 128.6 mm

 Operating Temperature -40 ~ 80° C (-40 ~ 176° F)

Fan Tray Module

 Air Flow Two fans, providing a total of 266 CFM (or above)

 Power Consumption 0.53 A @ 12 V per fan, 1.06 A total

 Rated Fan Speed 3400 rpm

 Life Span 70,000 hours continuous operation @ 40° C with

15~65% relative humidity

Ordering Information

 MIC-3001/8-4B 3U CompactPCI

chassis with 8-slot backplane, fan

tray module, and AC ATX power supply

 MIC-3001R/8-4B 3U CompactPCI

chassis with 8-slot backplane, for

tray module and AC ATX power supply

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

1 2 3 4 5 6 7 8 9 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Advantech MIC-3723 Spécifications Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Cartes/adaptateurs d'interface Advantech MIC-3723