Advantech PCM-9386 Manuel d'utilisateur télécharger pdf (Page 18)

EBPC-3500 User Manual 10

2.5 Installing the Disk Drive

The EBPC-3500 comes with a shockproof bracket for an internal 2.5” HDD. Please

refer to the following instructions to install the 2.5” hard disk drive.

1. To install the 2.5” internal HDD, remove the bottom cover by releasing the four

screws. (see Figure 2.6)

2. The bottom cover is with the HDD bracket mounted. Insert the disk drive into the

proper location of the bracket and secure them with the screws provided.

3. Connect the 44-pin IDE cable from the SBC.

4. Return the bottom cover with the 2.5” HDD in the original position and fasten it

with the four screws.

Figure 2.6 Installing the 2.5” HDD

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 37 38

Pas de commentaire

Advantech PCM-9386 Manuel d'utilisateur Page 18