Advantech PCI-1718 Manuel d'utilisateur télécharger pdf (Page 43)

35 Chapter 3

3.4 Field Wiring Considerations

When you use PCI-1718 cards to acquire data from outside, noises in the

environment might significantly affect the accuracy of your measure-

ments if due cautions are not taken. The following measures will be help-

ful to reduce possible interference running signal wires between signal

sources and the PCI-1718 card.

• The signal cables must be kept away from strong electromagnetic

sources such as power lines, large electric motors, circuit breakers or

welding machines, since they may cause strong electromagnetic inter-

ference. Keep the analog signal cables away from any video monitor,

since it can significantly affect a data acquisition system.

• If the cable travels through an area with significant electromagnetic

interference, you should adopt individually shielded, twisted-pair wires

as the analog input cable. This type of cable has its signal wires twisted

together and shielded with a metal mesh. The metal mesh should only

be connected to one point at the signal source ground.

• Avoid running the signal cables through any conduit that might have

power lines in it.

• If you have to place your signal cable parallel to a power line that has a

high voltage or high current running through it, try to keep a safe dis-

tance between them. Alternatively, you can place the signal cable at a

right angle to the power line to minimize the undesirable effect.

• The signals transmitted on the cable will be directly affected by the

quality of the cable. In order to ensure better signal quality, we recom-

mend that you use the PCL-10137 shielded cable.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 93 94

Pas de commentaire

Advantech PCI-1718 Manuel d'utilisateur Page 43