Advantech ADAM-4570S Manuel d'utilisateur télécharger pdf (Page 35)

Chapter 3: Installation and Configuration 27

Figure 3-8: Port Configuration Window

3.2.3 Port Configuration

further efforts.

Duplex Mode

The utility will detect the current transmission mode (half-

duplex or full-duplex) on the network segment, and set the

transmission mode for the device accordingly without your

further efforts.

IP address, Subnet Mask, Default Gateway

The IP address identifies your ADAM-4570 device on the

global network. Each ADAM-4570 has same default IP

address 10.0.0.1. Obtain a specific IP address from your

network administrator and then configure each ADAM-4570

with the individual IP address.

Note: The ADAM-4570 does not support auto IP address

configured by DHCP server.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 49 50

Pas de commentaire

Advantech ADAM-4570S Manuel d'utilisateur Page 35