Advantech PPC-S154T Manuel d'utilisateur télécharger pdf (Page 36)

PPC-S154T User’s Manual 24

Chapter 4 Jumper Settings and Connectors

4.1 Setting jumpers

You can configure your panel PC to match the needs of your application

by setting jumpers. A jumper is the simplest kind of electrical switch. It

consists of two metal pins and a small metal clip (often protected by a

plastic cover) that slides over the pins to connect them. To ìcloseî a

jumper, you connect the pins with the clip. To “open” a jumper you

remove the clip. Sometimes a jumper will have three pins, labeled 1, 2,

and 3. In this case, you would connect either pins 1 and 2 or pins 2 and 3.

A pair of needle-nose pliers may be helpful when working with jumpers.

If you have any doubts about the best hardware configuration for your

application, contact your local distributor or sales representative before

you make any changes.

open closed closed 2-3

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 83 84

Pas de commentaire

Advantech PPC-S154T Manuel d'utilisateur Page 36