
UNO-3072LA User Manual 22
Chapter 3
Initial Setup
3.1 Inserting a CompactFlash Card
UNO-3072LA provides two CompactFlash slots. One slot (CF2) on the
daughterboard is accessible from the top of the system, where you can
insert your CompactFlash card directly. The other slot (CF1) is inside
UNO-3072LA on its motherboard. You can set SW3-1 to decide which
one is the master.
SW3-1 on motherboard (refer to Figure A.4)
OFF: External CF master, Internal CF slave (CF1 Slave, default)
ON: External CF slave, internal CF master (CF1 Slave)
Note: Only one CompactFlash can be set as master
Internal & external CompactFlash doesn't support Hot Swap
Needs to use " Fixed Disk Mode" CompactFlash to install OS
Following is the procedure for the installing a CompactFlash card in the
internal slot (CN3) of your UNO-3072LA. Please follow these steps care-
fully:
1. Remove the power cord.
2. Unscrew the four screws from the top cover of UNO-3072LA.
3. Remove the top cover.
4. Plug a CompactFlash card with your OS and application program
into a CompactFlash card slot on mainboard.
5. Screw back the top cover with four screws.
3.2 Connecting Power
Connect
the UNO-3072LA to a
9 ~ 36
VDC power source. The
power
source can either be from a power adapter or an in-house
power source.
Commentaires sur ces manuels