Advantech TREK-303 Manuel d'utilisateur télécharger pdf (Page 48)

TREK-550/303 User Manual 36

6.4 GPIO Test

1. To execute the I/O Test, connect GPIO loopback, click Pin0, connect the end

which reads the signal, the bulb should light up, like wise to Pin1~Pin3. Next

check the Digital output box to execute the same procedure. See figure 6.

Figure 6.11 DI/O test

a. Digital Output ==> isolated relay driver output

b. Digital Input ==> isolated dry contact input

Figure 6.12 Digital in

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 54 55 56

Pas de commentaire

Advantech TREK-303 Manuel d'utilisateur Page 48