Advantech RSB-4210 Evaluation Kit Manuel d'utilisateur télécharger pdf (Page 30)

RSB-4210 User Manual 22

2.2.16 Wafer for Power ON/OFF (CN17)

When plug-in the adapter with CN17 shorted by a jumper, the system will power-on.

Or you can connect this wafer with an external button to control the power ON/OFF.

Figure 2.21 Pin Header for Power Button

2.2.17 Ethernet LAN1&2 Connector (CN18)

RSB-4210 supports dual LAN. One is extended from CPU module board directly and

another is extended from system bus. Both of them support 10/100 Mbps transfer

rates and are compliant with IEEE 802.3.

Pin Description Pin Description

1 SATA_5 V 2 GND

3GND 4 N/C

Note! If your system cannot power-on with an adapter, please check this

wafer in advance. There should be a jumper or external power switch on

the wafer.

Pin Description Pin Description

1 PWR_BTN+ 2 PWR_BTN-

Note! LAN connector with LED indicator: green LED indicates Ethernet active,

while yellow LED indicates Ethernet speed 10/100.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 103 104

Pas de commentaire

Advantech RSB-4210 Evaluation Kit Manuel d'utilisateur Page 30