9 MIO-2260 User Manual
Chapter 2 H/W Installation
2.2 Connectors
2.2.1 Connector list
2.2.2 Connector Settings
2.2.2.1 Battery Connector (BH1)
MIO-2260 supports Lithium 3 V/210mAH CR2032 battery with wire via battery con-
nector (BH1).
2.2.2.2 SMBus Connector (CN1)
MIO-2260 provides SMBus connector for customer connection to SMBus protocol
embedded device. It can be configured to I
2
C by T-p/n support.
Advantech also provide SMBus API allowing developer to interface with an embed-
ded system environment and transfer serial messages using the SMBus protocols,
allowing multiple simultaneous device control.
2.2.2.3 COM Port Connector (CN2)
The MIO-2260 provides 2 RS-232 serial ports in 10*2pin pin header. You can find the
pin assignments for the COM port connector in Appendix A.
Table 2.3: Connector list
CN1 SMBus
CN2 COM1/COM2
CN3 18 bits LVDS Panel
CN4 SODIMM DDR3
CN5 Audio
CN6 Inverter Power Output
CN7 GPIO
CN8 Front Panel
CN9 Mini-PCIe
CN10 MIOe
CN11 CF
CN12 SATA
CN13 GbE
CN14 External USB
CN15 12V Power Input
CN17 VGA
Note! How to clear CMOS: (Must follow below steps)
1. Turn off system power
2. Unplug CR2032 battery cable on BH1
3. Waiting for 15sec or short BH1 pin1-2
4. Connect battery cable on BH1
5. Turn on system power
Commentaires sur ces manuels