Advantech ARK-3380 Manuel d'utilisateur télécharger pdf (Page 57)

45 Chapter 4

4.2.9 Load Optimized Defaults

NOTE: Load Optimized Defaults loads the default system values directly

from ROM. If the stored record created by the Setup program should ever

become corrupted (and therefore unusable), these defaults will load auto-

matically when the ARK-339X Series system is turned on.

4.2.10 Set Password

Note: To enable this feature, first go to the Advanced BIOS Features

menu, choose the Security Option, and select either Setup or System,

depending on which aspect you want password protected. Setup requires

a password only to enter Setup. System requires the password either to

enter Setup or to boot the system. A password may be at most 8 charac-

ters long.

To Establish Password

1. Choose the Set Password option from the CMOS Setup Utility

main menu and press <Enter>.

2. When you see “Enter Password”, enter the desired password and

press <Enter>.

3. At the “Confirm Password” prompt, retype the desired password,

then press <Enter>.

4. Select Save to CMOS and EXIT, type <Y>, then <Enter>.

To Change Password

1. Choose the Set Password option from the CMOS Setup Utility

main menu and press <Enter>.

2. When you see “Enter Password”, enter the existing password and

press <Enter>.

3. You will see “Confirm Password”. Type it again, and press

<Enter>.

4. Select Set Password again, and at the “Enter Password” prompt,

enter the new password and press <Enter>.

5. At the “Confirm Password” prompt, retype the new password, and

press <Enter>.

6. Select Save to CMOS and EXIT, type <Y>, then <Enter>.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 77 78

Pas de commentaire

Advantech ARK-3380 Manuel d'utilisateur Page 57