Advantech IPC-5120 Manuel d'utilisateur télécharger pdf (Page 22)

IPC-7120 User Manual 14

2.3 Installing add-on cards

The IPC-7120 supports up to seven add-on cards with an Advantech ATX

motherboard. The IPC-5120 supports up to four add-on cards with an

Advantech microATX motherboard. To install an add-on card, please

proceed as follows:

1. Undo the four screws on the top of the disk drive housing and then

lift it up.

2. Select a vacant slot and remove its corresponding I/O bracket,

which is attached to the front panel.

3. Insert an add-on card into the slot. Fasten the card by a screw on

the top of the I/O bracket. (see Figure 2.5)

4. Repeat Step 2 and 3 if there is more than one card to be inserted.

5. Replace the disk drive housing and fasten it.

Figure 2.5: Installing an add-on card

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

Pas de commentaire

Advantech IPC-5120 Manuel d'utilisateur Page 22