Advantech IPC-6806S Manuel d'utilisateur télécharger pdf (Page 30)

IPC-6806S User Manual 20

3.3 Replacing the power supply

IPC-6806S supports a single 1U-high power supply. To change the power

supply, refer to Figure 3-2 and proceed as follows:

Figure 3.2: Changing the power supply

1. Unplug the power cord from the power supply of the IPC-6806S.

2. Open the top cover of the chassis.

3. Unplug the ATX power connector from the passive backplane,

+12V power connector from the CPU card, and the peripheral

power connector(s) from the drive disk(s).

4. Refer to Figure 3-2 to remove the four screws, which mount the

power supply to the chassis, then lift the power supply.

5. Place a new power supply into the chassis and fasten it with the

screws.

6. Plug the ATX power connector into the passive backplane, +12V

power connector into the CPU card, and the peripheral power con-

nector(s) into the proper disk drive(s).

7. Return the cover of the IPC-6806S and plug in the power cord.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

Pas de commentaire

Advantech IPC-6806S Manuel d'utilisateur Page 30