Advantech IPC-644 Series Manuel d'utilisateur télécharger pdf (Page 20)

IPC-644 User Manual 12

2.4.2 Installing a HDD or FDD

1. Loosen the five screws (one screw is for grounding) on the disk

drive mounting bracket and then lift it out.

2. Insert the disk drive into its proper location in the disk drive mount-

ing bracket, and then fix it in place with the supplied screws (see

Figure 2.5).

3. Connect a 34-pin flat cable from the CPU card to an FDD, or a 40-

pin flat cable from the CPU card to an IDE HDD. Plug in the power

connector into each disk drive.

4. Return the disk drive mounting bracket back to its original location

and fasten it with the five screws.

5. Return the upper cage and secure it with the four screws.

6. Plug the 20-pin ATX power supply connector into the backplane.

Figure 2.5: Installing disk drives into the housing

Disk drive mounting bracket

Floppy disk drive

Hard disk drive

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Pas de commentaire

Advantech IPC-644 Series Manuel d'utilisateur Page 20