Advantech SG-1103 Manuel d'utilisateur Page 34
- Page / 54
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
ROM-5420 User Manual 26
3.4 Build Instructions
This section will guide you how to build the u-boot & Linux kernel.
3.4.1 Build u-boot Image
Advantech has written a script to build the u-boot quickly. You can build u-boot image
by follow below steps:
1. Open "Terminal" on Ubuntu 10.04 LTS
2. $sudo su (Change to “root” authority)
3. Input user password
4. Change directory to BSP's scripts folder
5. #. setenv.sh (To configure the developing environment automatically)
6. #./cfg_uboot.sh mx6q_rom-5420_1G_config (To set the u-boot configura-
tion automatically)
7. #./mk_uboot.sh (Start to build the u-boot)
8. Then you can see u-boot_crc.bin and u-boot_crc.bin.crc are being built and
located in ../image.
3.4.2 Build Linux Kernel Image
Advantech offer you a script to build the “uImage” quickly. You can build uImage by
follow below steps:
1. Open "Terminal" on Ubuntu 10.04 LTS.
2. $sudo su (Change to “root” authority)
3. Input user password.
4. Change directory to BSP's scripts folder
5. #. setenv.sh (To configure the developing environment automatically)
6. 6)#./cfg_kernel.sh imx6_rom5420_defconfig (To set the uImage configu-
ration automatically)
7. #./mk_kernel.sh (Start to build the uImage)
8. Then you can see uImage is being built and located in ../image.
3.4.3 Build Log
You can find the build log from folder “./7420LBVxxxx”. If you got any error message
when building Linux kernel, it is suggested to look into the log file to learn more detail
about it.
Note! You have to wrap “setenv.sh” once you open a new "Terminal" utility
every time.
(i.e. #source setenv.sh)
Note! It is suggested to change to “root” authority to use the source code.
- User Manual 1
- ROM-5420 1
- Copyright 2
- Acknowledgements 2
- Product Warranty (2 years) 2
- Declaration of Conformity 3
- Warnings, Cautions and Notes 3
- Packing List 4
- Optional Accessories 4
- Development Board 4
- Ordering Information 5
- Safety Instructions 6
- Contents 7
- Chapter 1 9
- 1.1 Introduction 10
- Chapter 1 Product Overview 11
- 1.3 Mechanical Specifications 12
- 1.4 Electrical Specifications 12
- Chapter 2 13
- 2.1 ROM-5420 Board Looks 14
- 2.2 Board Connectors 14
- Chapter 2 H/W Installation 15
- Freescale i.MX6 16
- Dual/Quad 16
- Chapter 3 17
- 3.1 Test Tools 18
- 3.1.4 SD Test 19
- 3.1.5 GPIO Test 20
- 3.1.6 LVDS/HDMI/VGA Test 21
- 3.1.7 I2C Test 22
- 15 ROM-5420 User Manual 23
- 3.1.8 Mini PCIe (Wifi) Test 24
- 3.1.9 CAN Test 24
- 3.1.11 OpenGL Test 25
- 3.1.12 LAN Test 25
- 3.1.13 RS232 Test 26
- 3.1.14 Watchdog Timer Test 27
- 3.1.15 Audio Test 28
- 3.1.16 Photo Demo Test 28
- 3.1.17 Camera Input Test 28
- 3.1.18 Battery Test 29
- 3.2 Package Content 30
- 3.3 Set up Build Environment 33
- 3.4 Build Instructions 34
- 3.5 Source Code Modification 35
- ROM-5420 User Manual 28 36
- 3.6.2 Boot from Onboard Flash 37
- 3.7 Debug Message 38
- 31 ROM-5420 User Manual 39
- ROM-5420 User Manual 32 40
- 3.8.3 GPIO Setting 41
- 3.8.4 RS232 Initial Code 41
- 3.8.5 Display Output Setting 41
- ROM-5420 User Manual 34 42
- 3.8.6 Network Setup 43
- ROM-5420 User Manual 36 44
- Device Name 44
- SATA /dev/sda 44
- SD card /dev/mmcblk1 44
- Chapter 4 45
- 4.1 System Recovery 46
- Chapter 5 47
- 5.1 RISC Design-in Services 48
- Chapter 5 Advantech Services 49
- ROM-5420 User Manual 42 50
- ROM-5420 User Manual 44 52
Produits connexes et manuels pour Passerelles/contrôleurs Advantech SG-1103
(11 pages)Electrolux EOC5741BAX manuels
Manuels d'utilisation et guides de l'utilisateur pour Non Electrolux EOC5741BAX.
Nous fournissons des manuels en pdf 3 Electrolux EOC5741BAX à télécharger gratuitement par type de document : Manuel de l'utilisateur
Commentaires sur ces manuels