Advantech I/O Module 5000 Series Manuel d'utilisateur télécharger pdf (Page 62)

Chapter 5

5-7

port_set_speed(1,115200L);

//Enable Port FIFO. Here we enable 128 byte FIFO for port1.

port_enable_fifo(1);

//After these above settings are enabled, you can apply any

other function library to implement your program.

}

—A receive-and-transmit example program for the ADAM-5090

main()

{

int err_value, char character port_installed(1)

port_enable_fifo(1);

//check whether error has been received or not

err_value=port_rx_error(1);

//if error detected, print out the message

if(err_value)

{

printf(“\n Rx Error, The LSR Value=%02X”, Err_value)”;

}

//check whether FIFO receives data or not; if data received, read a

character

if(port_rx_ready(1))

{

character=port_rx(1);

}

//check whether FIFO is empty or not, if empty, send a character

if(port_tx_empty(1));

{

port_tx(1, character)

}

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 71 72

Pas de commentaire

Advantech I/O Module 5000 Series Manuel d'utilisateur Page 62