Advantech PCM-9388 Manuel d'utilisateur télécharger pdf (Page 40)

PCM-9388 User Manual 32

3.2.11 Set Password

To Establish Password

1. Choose the Set Password option from the CMOS Setup Utility main menu and

press <Enter>.

2. When you see “Enter Password”, enter the desired password and press

<Enter>.

3. At the “Confirm Password” prompt, retype the desired password, then press

<Enter>.

4. Select Save to CMOS and EXIT, type <Y>, then <Enter>.

To Change Password

1. Choose the Set Password option from the CMOS Setup Utility main menu and

press <Enter>.

2. When you see “Enter Password”, enter the existing password and press

<Enter>.

3. You will see “Confirm Password”. Type it again, and press <Enter>.

4. Select Set Password again, and at the “Enter Password” prompt, enter the new

password and press <Enter>.

5. At the “Confirm Password” prompt, retype the new password, and press

<Enter>.

6. Select Save to CMOS and EXIT, type <Y>, then <Enter>.

Note! To enable this feature, you should first go to the Advanced BIOS Fea-

tures menu, choose the Security Option, and select either Setup or Sys-

tem, depending on which setting you want password protected.

Selecting “Setup” requires a password only to enter Setup. Selecting

“System” requires the password either to enter Setup or to boot the sys-

tem. A password may be at most 8 characters long.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 87 88

Pas de commentaire

Advantech PCM-9388 Manuel d'utilisateur Page 40