Advantech DLoG MTC 6 Series Manuel d'instructions télécharger pdf (Page 27)

Automatic Switch-off

DLoG Config Manual V3.10 21

8.1.3. Special features of the switch-on/-off options

On DLoG MPC, IPC and ITC the following message is displayed upon activating a

switch-on option with ignition:

Figure 8.2: Automatic switch-on message for DC/AC devices

This information appears for safety's sake each time a switch-on with ignition option is

activated.

Caution:

Property

damage

Switch-on with ignition is only allowed with DC devices; this

blocks AC devices and they cannot be restarted.

8.1.4. Without automatic switch-off

The following symbol will be displayed in the uppermost line of the dialog if the

automatic switch-off option is not available:

All switch-on options are available; when switching off, however, the options with ignition

cannot be selected.

8.1.5. With automatic switch-off

When the automatic switch-off option is available, the following symbol will be

displayed in the dialog:

. When the switch-on option with ignition or always on is

chosen, switching off using the power key is not possible.

If the option Switch-off with power key was previously selected, a corresponding

message is displayed to the user. Then the switch-off option is automatically set to only

by system shutdown and the option with power key cannot be selected.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 67 68

Pas de commentaire

Advantech DLoG MTC 6 Series Manuel d'instructions Page 27