Advantech PCL-818 Series Manuel d'utilisateur télécharger pdf (Page 12)

PCL-818 Series User Manual 4

Keeping Output Values after System Reset

When the system is hot reset (power not shut down), the PCL-818HD/

HG/L can either retain the last analog output values, or return to its

default configuration, depending on the jumper setting. This practical

function eliminates danger caused by improper operation during unex-

pected system reset.

Board ID

The PCL-818HD/HG/L has a built-in DIP Switch that helps define each

card’s ID when multiple PCL-818HD/HG/L cards have been installed on

the same PC chassis. The board ID setting function is very useful when

users build their system with multiple PCL-818HD/HG/L cards. With

correct Board ID settings, you can easily identify and access each card

during hardware configuration and software programming.

Note: For detailed specifications of the PCL-818HD/HG/L, please refer

to Appendix A, Specifications.

1.3 Applications

• Transducer and sensor measurements

• Waveform acquisition and analysis

• Process control and monitoring

• Vibration and transient analysis

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 73 74

Pas de commentaire

Advantech PCL-818 Series Manuel d'utilisateur Page 12