Advantech PCL-734 Spécifications télécharger pdf (Page 20)

16 PCL-734 User's Manual

Programming the PCL-734 is extremely simple. Each output channel

corresponds to a bit in the card's registers. To turn on an output

channel you write a ‘‘1” to the corresponding bit.

The card requires four I/O register addresses. The address of each

example, BASE+0 is the card's base address and BASE+2 is the base

address + two bytes. If the card's base address is 300h, the register's

address is 302h. See Chapter 2 for information on setting the card's

base address.

Write Read

BASE+0 IDO bits 0-7 N/A

BASE+1 IDO bits 8-15 N/A

BASE+2 IDO bits 16-23 N/A

BASE+3 IDO bits 24-31 N/A

1 2 ... 15 16 17 18 19 20 21 22

Pas de commentaire

Advantech PCL-734 Spécifications Page 20