Advantech EKI-6311G Manuel d'utilisateur Page 10

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 52
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 9
10
2.4 Basic Configuration
2.4.1 Basic Configuration Steps
This section describes a two-step SYSTEM
configuration procedure to setup
EKI-6311G.
Step1 : Modify the factory-default parameters on the web page
“/Network/Network/, and click APPLY to save the changes.
Step2 : Modify the factory-default parameters on the web page
/WIRELESS/Wi-Fi 1, and click APPLY to save the changes, than click
“/SYSTEM/Reboot/Reboot to take effect on the previous configuration
changes.
2.4.2 Logging into the Web Interface
The EKI-6311G supports access to the configuration system through the use of an
HTTP Interface.
Web Configuration
Before configuring EKI-6311G, the user needs to know the IP Address assigned to
the unit. When shipped from the factory, the IP Address 192.168.1.1 was
assigned to the EKI-6311G by default. To start a web connection, use
http://192.168.1.1
Web Access Procedures
Once you identify the IP Address assigned to EKI-6311G, use web browser to
configure EKI-6311G through the HTTP Interface. The following procedure
explains how to configure each item.
Step1 : Open your browser and enter the IP Address
Step2 : Press <ENTER> key and the EKI-6311G Login screen appears as shown
in Figure 2-5.
Vue de la page 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

Commentaires sur ces manuels

Pas de commentaire