Advantech ACP-4320 Manuel d'utilisateur télécharger pdf (Page 28)

ACP-4320 User Manual 18

2.5.2 Installing a 3.5" floppy disk drive

1. Remove the cover of one 3.5" drive bay.

2. Insert one 3.5" floppy disk drive into the proper location in the FDD

bracket and fix it with four screws.

3. Attach the FDD bracket to the drive bay unit and fix it with two

screws.

4. Connect a 34-pin flat cable from the CPU card/motherboard to the

floppy disk drive.

5. Plug in a floppy drive power connector from the power supply to the

floppy disk drive.

2.5.3 Installing an internal hard disk drive in the 3.5" drive bay

1. Insert one 3.5" hard disk drive into the proper location in the FDD

bracket and fix it with four screws.

2. Attach the FDD bracket to the drive bay unit and fix it with two

screws.

3. Connect a 40-pin flat cable from the CPU card/motherboard to an ATA

(IDE) hard disk drive or a SATA cable to a SATA hard disk drive.

4. Plug in a peripheral power connector from the power supply to the

hard disk drive.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

Pas de commentaire

Advantech ACP-4320 Manuel d'utilisateur Page 28