Advantech ACP-4320 Manuel d'utilisateur télécharger pdf (Page 36)

ACP-4320 User Manual 26

7. Slide the fan bracket back to the chassis and fasten the thumb screw.

8. Plug in the fan power connector.

3.2.2 Replacing the fan behind the SAS/SATA HDD backplane

1. Remove the two screws, which mount the FDD bracket to the drive

bay unit.

2. Remove the four screws, which mount the drive bay unit to the chas-

sis, then take out the drive bay unit.

3. Un-plug the fan power connector.

4. Remove the four screws, which mount the failed fan to the fan bracket,

and take out the fan.

6. Place a new fan on the fan bracket, and fix it with four screws.

7. Plug in the fan power connector.

8. Return the drive bay unit into the chassis and fix it with four screws.

9. Return the FDD bracket and fix it with the four screws.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

Pas de commentaire

Advantech ACP-4320 Manuel d'utilisateur Page 36