Advantech AIMB-258 Manuel d'utilisateur télécharger pdf (Page 47)

39 AIMB-258 User Manual

Chapter 2 BIOS Operation

! Onboard Serial port 1 [3F8 / IRQ4]

This item allows user to adjust serial port 1 address and IRQ.

! Onboard Serial port 2 [2F8 / IRQ3]

This item allows user to adjust serial port 2 address and IRQ.

! Onboard Serial port 3 [3E8 / IRQ4]

This item allows user to adjust serial port 3 address and IRQ.

! Onboard Serial port 4 [2E8 / IRQ3]

This item allows user to adjust serial port 4 address and IRQ.

! Onboard Serial port 5 [4F8 / IRQ5]

This item allows user to adjust serial port 5 address and IRQ.

! Onboard Serial port 6 [4E8 / IRQ7]

This item allows user to adjust serial port 6 address and IRQ.

2.2.6 USE Device Setting

! USB 1.0 Controller

Select “Enabled” if your system contains a Universal Serial Bus (USB) controller

and you have USB peripherals. The choices are "Enabled" and "Disabled".

! USB 2.0 Controller

This entry is used to disable/enable the USB 2.0 controller only. The BIOS itself

may or may not have high-speed USB support. If the BIOS has high speed USB

support built in, the support will automatically turn on when a high speed device

is attached. The choices are "Enabled" or "Disabled".

! USB Operation Mode

Set the USB 2.0 controller to Hi Speed (480 Mbps) or Full Speed (12 Mbps).

! USB Keyboard / Mouse Function

Select Enabled. if you plan to use a USB keyboard/Mouse. The choices are

"Enabled" and "Disabled".

! USB Storage Function

Select "Enabled" if you plan to use an external USB storage device to boot the

system under DOS mode. The choices are "Enabled" and "Disabled".

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 83 84

Pas de commentaire

Advantech AIMB-258 Manuel d'utilisateur Page 47