Advantech DLoG MTC 6 Series Manuel d'utilisateur télécharger pdf (Page 19)

Basic safety guidelines

MTC 6 Series User’s Manual V2.00 9

2.6. Connect / disconnect external devices

NOTICE:

Property

damage

Disconnect the industrial PC from the power supply before

connecting / removing peripheral devices (this does not apply

to USB devices)

Otherwise considerable damage could be caused to both the

industrial PC and the peripheral devices.

• Make sure that peripherals with their own power supply are either

switched on at the same time as the industrial PC or after the

industrial PC is switched on.

• If you don‘t do this, you must ensure that a backflow from the

external device to the industrial PC cannot take place.

Only use authorized accessories

• Only use the cables, power packs and other accessories that

have been tested and approved for the respective industrial PC

by DLoG GmbH.

• Ask your Advantech-DLoG sales representative about authorized

accessories.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 96 97

Pas de commentaire

Advantech DLoG MTC 6 Series Manuel d'utilisateur Page 19