Advantech DLoG MTC 6 Series Manuel d'utilisateur télécharger pdf (Page 21)

Basic safety guidelines

MTC 6 Series User’s Manual V2.00 11

2.8. Clean / maintain industrial PC

Servicing / cleaning the device: Disconnect the industrial PC

from the power supply

• Disconnect the industrial PC from the power supply before

cleaning or servicing it.

• Never clean the industrial PC with compressed air, a pressure

washer or a vacuum cleaner.

• If necessary, clean the housing of the industrial PC with a damp

cloth.

• Clean the touch-screen with a non-abrasive cloth dampened with

water.

2.9. Modifications and repairs only by Advantech-DLoG

Modifications to the industrial PC are not allowed.

Opening the industrial PC is not allowed.

All warranties by DLoG GmbH relating to the industrial PC are

voided by modifications / by opening the unit.

Do not carry out any repairs on the industrial PC yourself.

• Always contact the responsible technical service officer at

Advantech-DLoG and send in your unit for repair if necessary.

• Refer to the nameplate on the back of the unit for important

technical service information.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 96 97

Pas de commentaire

Advantech DLoG MTC 6 Series Manuel d'utilisateur Page 21