Advantech DLoG MTC 6 Series Manuel d'utilisateur télécharger pdf (Page 61)

Initial operation

MTC 6 Series User’s Manual V2.00 51

5.8. Connecting external devices

The MTC 6 must be disconnected from the power supply:

• before external devices (e.g., scanner, keyboard) are connected or disconnected

• and before the MTC 6 can be connected to a network.

All connections and interfaces on the MTC 6 are located on the underside of the unit.

NOTICE:

Property

damage

Make sure that external peripheral devices with their own power

supply are switched on at the same time as the MTC 6 or after you

start the MTC 6. If this is not possible, please ensure that the MTC 6

is adequately protected from power leakage caused by an external

device.

Only power up the MTC 6 when all devices have been connected

and the MTC 6 has been closed correctly (remember the cable

cover!). Otherwise, you may damage the MTC 6.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 96 97

Pas de commentaire

Advantech DLoG MTC 6 Series Manuel d'utilisateur Page 61