Advantech Data Acquisition Modules ADAM 4000 Manuel d'utilisateur télécharger pdf (Page 402)

100

101

Appendix D

Appendix D Utility Software D

-7

INIT* state defaults:

Baud rate: 9600

Address: 00h

Checksum: disabled

Forcing the module in INIT* state does not change any parameters in the

module’s EEPROM. When the module is in the INIT* state with its INIT*

and GND terminals shorted, all configuration settings can be changed, and

the module will respond to all other commands normally.

Notice:

Init Mode

When the switch is set to the initial mode, the module will operate

with its factory settings. (Address 0 with data format 9600, N, 8, 1).

Normal Mode

When the switch is set to the normal mode, the module will operate

with user-defined settings. A power reset will not alter these settings.

5. Connect computer to the ADAM I/O module using a RS-232 to RS-485,

or USB to RS-485 converter.

1 2 ... 397 398 399 400 401 402 403 404 405 406 407 ... 428 429

Commentaires sur ces manuels

Pas de commentaire

Advantech Data Acquisition Modules ADAM 4000 Manuel d'utilisateur Page 402

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Advantech Data Acquisition Modules ADAM 4000