Advantech UniGateway EH-2101W Manuel d'utilisateur télécharger pdf (Page 24)

Chapter 4

PC Configuration

This Chapter details the PC Configuration required on the local ("Internal")

LAN.

Overview

For each PC, the following may need to be configured:

• TCP/IP network settings

• Internet Access configuration

• Printer setup

• Wireless configuration

Windows Clients

This section describes how to configure Windows clients for:

• Internet access via the UniGateway EH-2101W

• Sharing the Printer connected to the UniGateway EH-2101W.

The first step is to check the PC's TCP/IP settings.

The UniGateway EH-2101W uses the TCP/IP network protocol for all functions, so it is

essential that the TCP/IP protocol be installed and configured on each PC.

TCP/IP Settings - Overview

If using the default EH-2101W settings, and the default Windows TCP/IP

settings, no changes need to be made.

• By default, the EH-2101W will act as a DHCP Server, automatically providing a suitable

IP Address (and related information) to each PC when the PC boots.

• For all non-Server versions of Windows, the default TCP/IP setting is to act as a DHCP

client.

If using a Fixed (specified) IP address, the following changes are re-

quired:

• The Gateway must be set to the IP address of the EH-2101W

• The DNS should be set to the address provided by your ISP.

If you wish to check your TCP/IP settings, the procedure is described in the following sec-

tions.

If your LAN has a Router, the LAN Administrator must re-

configure the Router itself. Refer to Chapter 8 - Ad-

vanced Setup for details.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 98 99

Pas de commentaire

Advantech UniGateway EH-2101W Manuel d'utilisateur Page 24