Advantech UniGateway EH-2101W Manuel d'utilisateur télécharger pdf (Page 78)

Advanced Configuration

Printer Port

Normally, these settings do not need to be changed.

Figure 41: Printer Port Screen

AppleTalk

AppleTalk zone

This determines which Apple systems can gain access to this

printer. The default value is *, which allows access by all sys-

tems. If you enter another zone name, only Apple systems in that

zone will be able to access the printer.

Printer Object Type

Sets the type of printer attached. The default setting is "Laser-

Writer"

If the "Printer Object Type" is incorrect, the printer will not be

visible from your Apple system.

Communication

Protocol

You must use the same setting as your Macintosh.

Logical Printers

No (L1, L2, L3)

Logical printer configuration is only required if using LPD

printing under Linux or Unix. Otherwise, these settings are

ignored

There are 3 Logical Printers (Ports), named L1, L2, and L3.

These names can not be changed, and must be used when select-

ing the logical printer from your Unix system.

Pre-string (HEX)

Enter (in HEX) the series of printer commands to be sent to the

attached printer BEFORE each print job.

Post-string (HEX)

Enter (in HEX) the series of printer commands to be sent to the

attached printer AFTER each print job.

LF to CR/LF

If checked, Unix-style LF (line feed) characters at the end of each

line will be converted to CR/LF (carriage return/line feed) pairs,

as used in MSDOS and Windows.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 98 99

Pas de commentaire

Advantech UniGateway EH-2101W Manuel d'utilisateur Page 78