Advantech UniGateway EH-2101W Manuel d'utilisateur télécharger pdf (Page 81)

Figure 43: Routing Screen

Data - Routing Screen

RIP

Enable RIP

Check this to enable the RIP (Routing Information Protocol) feature

of the UniGateway EH-2101W.

The UniGateway EH-2101W supports RIP 1 only.

Static Routing

Table Entries

This list shows all entries in the Routing Table.

• The "Properties" area shows details of the selected item in the

list.

• Change any the properties as required, then click the "Update"

button to save the changes to the selected entry.

Properties

• Destination Network - The network address of the remote LAN

segment. For standard class "C" LANs, the network address is

the first 3 fields of the Destination IP Address. The 4th (last)

field can be left at 0.

• Network Mask - The Network Mask for the remote LAN

segment. For class "C" networks, the default mask is

255.255.255.0

• Gateway IP Address - The IP Address of the Gateway or

Router which the UniGateway EH-2101W must use to commu-

nicate with the destination above. (NOT the router attached to

the remote segment.)

• Metric - The number of "hops" (routers) to pass through to

reach the remote LAN segment. The shortest path will be used.

The default value is 1.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 98 99

Pas de commentaire

Advantech UniGateway EH-2101W Manuel d'utilisateur Page 81