Advantech RS-485 Manuel d'utilisateur télécharger pdf (Page 198)

100

101

6-76 ADAM-5000

Command Set

$aaSiCjAhEs $aaSiCjAhEs

Name Enable/Disable Alarm

Description Enables/Disables the High/Low alarm of the specified

input channel in the addressed ADAM-5000 system

Syntax $aaSiCjAhEs(cr)

$ is a delimiter character.

aa (range 00-FF) represents the 2-character hexadecimal

address of an ADAM-5000 system.

SiCj identifies the desired slot i (i : 0 to 3) and the

desired channel j (j : 0 to 7).

AhEs is the Set Alarm Mode command.

h indicates alarm type and can have the value H = High

alarm, L = Low alarm

s indicates alarm enable/disable and can have the value

E = Enable, D = Disable

(cr) represents terminating character, carriage return

(0Dh)

Response !aa(cr) if the command was valid

There is no response if the system detects a syntax error

or communication error or if the specified address does

not exist.

! delimiter character indicating a valid command was

received.

aa represents the 2-character hexadecimal address of the

corresponding ADAM-5000 system.

(cr) represents terminating character, carriage return

(0Dh)

5013/5017/5017H/5018

Analog Input Alarm

1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 347 348

Commentaires sur ces manuels

Pas de commentaire

Advantech RS-485 Manuel d'utilisateur Page 198

Commentaires sur ces manuels

Produits connexes et manuels pour Modules d'entrées/sorties numériques et analogiques Advantech RS-485