Advantech RS-485 Manuel d'utilisateur télécharger pdf (Page 214)

100

101

6-92 ADAM-5000

Command Set

$aaSiCjArrff $aaSiCjArrff

? delimiter character indicating the command was

invalid.

aa (range 00-FF) represents the 2-character hexadecimal

address of an ADAM-5000 system.

(cr) is the terminating character, carriage return (0Dh)

Example command: $35S3C0A3110(cr)

response: !35(cr)

The analog output channel 0 in slot 3 of the ADAM-

5000 system at address 35h is configured to an output

range 4 to 20mA, engineering units data format, and a

slew rate of 1.0mA/sec.

The response indicates that the command has been

received.

Note: An analog output module requires a maximum of 20

milliseconds to perform auto calibration and ranging

after it is reconfigured. During this time span, the

module cannot be address to perform any other

actions.

Figure 6-4 Data format of 8-bit parameters

5024 Analog Output

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 347 348

Commentaires sur ces manuels

Pas de commentaire

Advantech RS-485 Manuel d'utilisateur Page 214

Commentaires sur ces manuels

Produits connexes et manuels pour Modules d'entrées/sorties numériques et analogiques Advantech RS-485