Advantech RS-485 Manuel d'utilisateur télécharger pdf (Page 28)

100

101

2-10 ADAM-5000

Installation Guideline

INIT* is used for changing baud rate and checksum. COM is provided

as reference to the RS-485 ground signal. DATA+ and DATA- are

provided for the RS-485 twisted pair connection.

Figure 2-7 ADAM-5000 Wiring and connections

I/O Modules Wiring

The system uses plug-in screw terminal blocks for the interface

between I/O module and field devices. The following information must

be considered when connecting electrical devices to I/O modules.

1. The terminal block accepts 0.5 mm

to 2.5 mm

wires

2. Always use a continuous length of wire, do not combine

wires to attain needed length

3. Use the shortest possible wire length

4. Use the wire trays for routing where possible

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 347 348

Commentaires sur ces manuels

Pas de commentaire

Advantech RS-485 Manuel d'utilisateur Page 28

Commentaires sur ces manuels

Produits connexes et manuels pour Modules d'entrées/sorties numériques et analogiques Advantech RS-485